BBJ Mold and Mildew Remediation Concentrate Material Safety Data Sheet (MSDS)
Overview, Technical Data Sheet (PDS)
I. PRODUCT IDENTIFICATION
| BBJ Mold and Mildew Remediation Concentrate |
Disinfectant/Cleaner
EPA 10324-80-67212 |
II. HAZARDOUS INGREDIENTS
| Alkyl dimethyl benzyl ammonium chloride (C12-C16) |
2.200 |
68424-85-1 |
| Octyl decyl dimethyl ammonium chloride |
1.650 |
32426-11-2 |
| Dioctyl dimethyl ammonium chloride |
0.825 |
5538-94-3 |
| Didecyl dimethyl ammonium chloride |
0.825 |
7173-51-5 |
| Ethanol |
1.000 |
112-34-5 |
III. PHYSICAL DATA
| BOILING POINT: 190-210o F |
SPECIFIC GRAVITY: 1.01 - 1.02 @ 20o C |
| FREEZING POINT: 10o F |
VAPOR PRESSURE: 0.3 to 1.2 mm Hg |
| VAPOR DENSITY: not determined |
APPEARANCE: Clear liquid - dark green |
| PH @ >12o |
SOLUBILITY IN WATER BY WT.: Complete |
| EVAPORATION RATE (Butyl Acetate=1) Similar to water |
ODOR: Pine |
IV. FIRE AND EXPLOSION HAZARD DATA
| FLASH POINT: >201o F |
FLAMMABLE LIMITS: N/A |
| EXTINGUISHING MEDIA: Water, water fog |
SPECIAL FIRE HAZARDS: None |
Regulatory Note: This product contains less than 78 grams per liter VOC'S
V. REACTIVITY DATA
| STABLE [ x ] UNSTABLE [ ] |
HAZARDOUS POLYMERIZATION MAY OCCUR [ ]
HAZARDOUS POLYMERIZATION WILL NOT OCCUR [ x ] |
| INCOMPATIBILITY: Acids, strong oxidizers or reducing agents. |
| HAZARDOUS DECOMPOSITION PRODUCTS: Hydrogen chloride; nitrous oxides |
| CONDITIONS TO AVOID: N/A |
VI. SPILL OR LEAK PROCEDURES
| STEPS TO BE TAKEN IN CASE MATERIAL IS RELEASED OR SPILLED: Absorb with sand, earth or saw dust. |
| DISPOSAL METHOD: Absorb and landfill or incinerate. |
VII. HEALTH HAZARD DATA
| THRESHOLD LIMIT VALUE: None established |
| EFFECTS OF OVEREXPOSURE: May be fatal by ingestion. Irritating to eyes. May irritate skin on prolonged contact. Primary routes of exposure risk are skin and eye contact. |
| EYE: Flush with water for 15 minutes |
| SKIN: Wash with soap and water |
| INHALATION: None known |
| INGESTION: Drink large quantities of water - call physician |
VIII. PROTECTIVE EQUIPMENT
| VENTILATION: No special requirements |
| RESPIRATORY PROTECTION: No protection required |
| PROTECTIVE CLOTHING: Protective gloves (plastic or rubber) when using for extended time |
| EYE PROTECTION: Safety goggles |
IX. OTHER SPECIAL PRECAUTIONS
| PRECAUTIONS TO BE TAKEN IN HANDLING AND STORAGE: Keep container closed |
| SPECIAL COMMENTS: None |
|
